-Custom Sine Wave UPS & UPS Backup Factory, NETCCA since 2009

SMART SERIES RACKMOUNT UPS

• Pure sine wave output.
• Microprocessor based design with true Line-Interactive structure.
• Adjustable voltage sensitivity, charging voltage, & voltage-transfer points.
• Remaining Estimated Backup Time indication, Smart battery management with intelligent double stages of charging control.
• Real time auto-detection for battery condition.
• Automatic restart of load after UPS shutdown.
• Smart AVR function (Two buck / boost modes).
• Almost Zero Transference. • Generator compatible.
• "Green Power" design with auto on/off function & adjustable level.
• Hot-swappable batteries (optional for 6K & 10K models).
• Network manageable (SNMP optional).
• RS-232 interface for communication, compatible with all major O.S., including Windows, Linux, SCO UNIX, & DOS.
• Protection for overload, short circuit, & over heat.

Capacity	1000VA / 800W
Nominal inputs	200V/220V/230V/240V AC (Selectable)
Output Voltage	220V/230V AC (Selectable)
Voltage Waveform	Sine wave
Crest Factor	3：1
Frequency	50/60Hz (Auto Select)
(Synchronized to Mains)	47Hz ~ 55Hz for 50Hz nominal 56Hz ~ 65Hz for 60Hz nominal
Regulation (Nominal)	±5% typical of nominal voltage
Regulation (Batt. mode)	±3% of selected output voltage (adj. with the remote set-up software)
Transfer time	Blackout 4ms typical Brownout 1ms typical Battery mode to Normal mode：1ms typical
Over current protection	Over load alarm level 100% ~125% , shutdown after 1min Over load shutdown level 126%~150% , shutdown after 10s Over load shutdown level 151%
Efficiency (Normal mode)	≥85%
Noise Filtering	Full time EMI/RFI filtering
Input Voltage Range	-35% ~ +25% for selected nominal voltage.
Surge Protection	500VA ~ 1500VA：220 Joules
Battery type	Maintenance–free sealed, valve-regulated, Lead-Acid
Voltage	800VA /1000VA 48Vdc
Charging method	Smart pulse charging with two charging modes. Quick charging when battery is not fully charged, Trickle charging when battery is 90% fully charged.
Charging time	Less than 3 hours to 90% at normal line and normal temperature.
Protection	• Over current protection (SCR control) • Over charging voltage protection (SCR control) • Thermal protection (CPU control) • When temperature inside UPS is over 45℃, charger will stop charging for 2.5 • minutes followed by an 1.5 minutes charging. The cycle will be repeated until • the temperature is lower than 44℃.





Monitoring	Smart monitoring & warning for failed battery or open-circuit battery.
Communications & Management
Standard Interface port	UPSilon2000 compatible.
	500VA ~ 1500VA：RS232, optional for RJ45, USB.
Optional Interface port	DB9, SNMP (external type)
Control panel	LCD or LED Selectable
Audible alarm	Alarm on battery：Low battery & Battery over voltage Alarm on abnormal operation：Over load, Short-circuit, & Over heat
Environmental and Safety
Operating Temp.	Up to 1500 meters：0℃ to 40℃ (32℉ to 104℉)
Transit/storage Temp.	-15℃ to 55℃ (5℉ to 131℉)
Relative Humidity	5 - 95% non-condensing
Operating Altitude	0 ~ 3000 meters
Audible noise	≦40 dBA (at 1M from surface of unit)
Safety Markings	CE
EMC	Class B, EN50091-2, FCC part15, IEC1000-2-2
Quality control system	ISO 9001
Dimensions: (D×H×W)	500VA ~ 1000VA：44030088 (mm)
Weight:	1000VA：12.5 kgs

	QUICK LINE	CONTACT US
NETCCA China UPS power, elevator power, shutter power, home inverter, solar inverter, voltage stabilizer, LED lamp, lithium battery OEM,ODM professional manufacturer	PRODUCTS OEM&ODM SERVICE PROJECT ABOUT US INFO-CENTER CONTACT US	CONTACT PERSON : Mr. Lu OFFICE ADD :JiLi Industrial Park, NanZhuang Town, FoShan City, GuangDong, China. WHATSAPP : +86-18825944111	TEL :+86-0757-85331154/85331416 E-MAIL : netcca@163.com SKYPE : netcca

HOME

PRODUCTS∨

OEM&ODM SERVICE

PROJECT

INFO CENTER∨

ABOUT US∨

CONTACT US